The Jeep Wrangler, Jeep’s core brand identity off-road SUV produced since 1986, is geared for go-anywhere towing with confidence. Its remarkable durability and cross-country hauling capabilities easily allow jeep owners to indulge in camping or boating ventures.
Hauling abilities of Jeep Wrangler 2022 models stand at 2,000 lbs. and 3,500 lbs., as may be the chosen model and the configurations. The 2-door versions’ topmost hauling ability is 2,000 lbs., while it is 3,500 lbs. for 4-door ones.
Most Wrangler models have both 2- and 4-door versions. However, there are only 4-door versions for Sahara, Sahara Altitude, and Sport Altitude. The sturdy capabilities of the new Jeep Wranglers are built on a powerful engine and advanced systems incorporating various standard towing features. With their maximum tugging capacity of 3,500 lbs., you can pull any of these:
- Teardrop trailer
- Pop-up trailer
- Utility trailer
- Small camper trailer
- Small horse trailer
- Fiberglass fishing boat
- 20-foot aluminum fishing boat
- Two motorbikes
- Two ATVs
- Snowmobile
The newest 2023 Jeep Wrangler, labeled the Most Capable Wrangler Generation Ever with a maximum hauling ability of 3,500 lbs., comes with 5 renowned engine options. This model offers superb performances, like 33.6 inches of water traversing and 12.9 inches ground clearance, with Command-Trac 4WD (4-wheel drive), Selec-Trac 4WD, and Rock-Trac 4WD model choices.
What’s Towing Capacity?
Any vehicle’s capacity for towing, given in pounds (lbs.), is the highest-rated weight it can pull safely when traveling. It’s defined by factors like vehicle configuration, power of the engine, transmission, and suspension system, as well as the distribution of the vehicle’s total weight.
Auto manufacturers calculate and indicate their vehicle hauling capacities with a typical driver’s body weight included. The highest towing ability of a vehicle is normally printed in the vehicle’s handbook. The vehicle’s tugging capacity and similar important data are displayed at the driver’s door as well.
Towing capacities are differentiated into braked and unbraked status. Braked towing capacity is the topmost weight a vehicle can tow when the trailer uses its own brakes, whereas unbraked towing capacity is what the vehicle can haul if the trailer has no brakes.
Splendid Towing Models
There are three 4WD Jeep Wrangler models that have splendidly enhanced hauling capacities:
- Selec-Trac 4WD operates on the 2-wheel drive for normal road conditions but can engage 4-wheel drive when facing rain, snow, ice, mud, etc.
- Rock-Trac 4WD offers a 4:1 gear ratio, Tru Lok locking variations, and an electronic sway bar system, which confront off-road challenges.
- Command-Trac 4WD provides an excellent towing option, with a neutral selection meant for smooth-path towing while featuring a 2.72:1 gear ratio to handle rugged terrain experiences.
Towing Package
Jeep’s Wrangler hauling package includes:
- Genuine Class IV Jeep Wrangler fastener
- Genuine Jeep full-sized spares
- Upgraded cooling system
- Genuine Jeep wiring attachment
- Genuine Jeep heavy-duty 180A current generator
For its optimized tugging ability, you’ll need a package that comprises:
- Hoist and control device
- Regulated subsidiary switches
- 700-ampere easy-maintenance battery
- 240-ampere current generator
- 7- & 4-connection wiring bands
- Class II grade hauling fastener
Also, consider upgrading with LED headlights and other MOPAR accessories to augment towing ability.
Safe Towing
The crucial recommendation supports setting the gross vehicle weight rating (GVWR) of every towed vehicle to be under 80% of the topmost rated capacity. Now, the highest rated capacity is indicated for ideal conditions. But such conditions are hardly found in reality, especially in locations where travel trailers or teardrop campers are towed.
Maintaining a surplus 20% power in hand implies still having adequate capacity when needed to take the trailer onto an unsteady surface, merge with traffic on the highway, or confront a steep slope. Staying within this 80% highest limit also minimizes the hazards of enduring unsafe trailer sways when speeding on highways.
When purchasing any towable trailer/RV, it is prudent to compare all GVWR to your vehicle’s highest towing ability. The given GVWR of the RV seller is the estimated RV weight when it bears a full load. Appropriately, the GVWR should be limited to 80% level of the vehicle’s rated highest towing ability.
Conclusion
The Jeep Wrangler models are well-entrenched as robust go-anywhere vehicles with suitable towing abilities. Hauling campers or boats with those can definitely uplift the adventure times. Yet, before starting any journey with an extra load some words of wisdom can be: It’s always safety first. Comply with all rules of the road: slow and steady speeds, safe distances from the vehicles ahead, and well-matched equipment for what you must tow.
Questions & Answers
How to boost any vehicle’s hauling capacity?
Alongside proper care and use of high-grade fuel for optimizing overall vehicle performance, you need mechanical upgrades to raise the highest hauling capacity. This will likely involve fixing a weight-distribution device, and renovating the suspension structure, and/or rear axle replacement. You might consult a qualified mechanic for this.
Why are towing improvements needed?
Towing wields huge pressure on the vehicle engine, transmission, and suspension arrangement. The utmost strain is when any trailer has to move from a standstill position. Even after gaining momentum, the vehicle needs to apply sustained force using more fuel. When moving in traffic or having to stop at any traffic light, the brakes inevitably take much pressure to slow the speed or stop. Going overboard the vehicle’s rated capacity will steer you, the vehicle, the passengers, and the trailer into great danger. It could turn into a dangerous or unruly high-speed swaying trailer, with likely damaged engine, suspension device, and transmission, and even a hazardous failure of timely halt.
Are there ways to optimally raise vehicle hauling capacity?
When a vehicle is at the rated towing ability or the trailer surpasses that level slightly, then there are some modification options as given below to raise the vehicle hauling ability. This prevents getting stuck on the road. Consult your mechanic for the optimized towing renovation needs suited to your budget.
- Upgrade the tow fastener
- Install a power programming maintenance accessory
- Renovate with stronger axles
- Fix optimum performance brakes
- Improve the tow vehicle’s suspension structure
- Boost the vehicle’s intake and exhaust
- Set up a transmission radiator
Hello there, this is Thomas Byrd. I am a professional car mechanic who leads a team of junior mechanics in a repair and restoration shop. In the beginning, I used to work for a jeep service center as a basic worker. From there I keep learning, changed my job 2 times and now I am a professional who leads a group of mechanics. Though a have expertise in the jeep, I know very well about all types of cars. To share my knowledge and skills with others I have created this blog website. Whenever I get free time from work I give my time to my blog.
