How to reset oil change jeep wrangler- Step by Step Guide!

If you own a Jeep Wrangler, regular maintenance intervals such as oil changes are crucial to maintain to keep your car running and extend its life. One essential aspect of maintaining your Jeep is knowing how to reset the oil change Jeep Wrangler after an oil change has been performed. This will keep your car’s maintenance tracking system up to date and accurate.

Failure to reset the oil change light may cause misunderstandings regarding the next oil change’s due date. Resetting it keeps your Jeep in good shape and the system current with the new service.

2. The Reasons for Resetting the Oil Change Light

The oil change light is a reminder from your Jeep Wrangler onboard computer that it is time to replace the engine oil. The alert is derived from predetermined intervals designed to keep the engine at optimum performance. It is necessary to reset the oil change light after an oil change for several reasons:

• Accurate Maintenance Record: Resetting the light ensures that the maintenance system in the car accurately reflects when the next oil change is due.
• Prevents False Alerts: Failure to reset it may cause you to receive reminders even after the oil change has been done.
• Helps Prevent Engine Damage: Ensuring that the oil change light and the actual service are synchronized helps prevent overlooked oil changes, which may result in excessive wear on the engine.

Properly resetting the oil change light after every oil change keeps the system in sync with your Jeep’s maintenance schedule, which in turn prolongs the vehicle’s life.

3. Before You Start: Have Tools Ready

Before you proceed to reset the oil change light, make sure you have already completed changing the oil and that the ignition key is turned to the ‘off’ position. This will ready the vehicle for the resetting process. The following will be needed:

• Vehicle Key or Key Fob: For turning on the ignition and engaging the vehicle’s electrical system.
• Ignition Switch: You’ll need to toggle the ignition switch to specific positions during the reset process.
• Foot Pedal Access: Be ready to press the gas pedal a few times to trigger the reset mechanism in some Jeep Wrangler models.
• Owner’s Manual (Optional): For specific details on your Jeep’s model and reset procedure.

Having these tools prepared ahead of time will streamline the reset process and avoid delays.

4. Step-by-Step Guide to Reset the Oil Change Light in Jeep Wrangler

It is quite simple to reset the oil change light, and there are some important steps you can perform yourself within minutes. Here’s how to do it for different Jeep Wrangler models:

For Jeep Wrangler JK Models:

• Ignition On: Place the key in the ignition and turn it to the ‘on’ position but don’t start the car.
• Press the Gas Pedal: Press the accelerator three times in rapid succession.
• Wait for the Reset: The oil change light will go off, signaling the reset is done.

For Jeep Wrangler JL Models:

• Turn the Key to ‘On’: Insert the ignition key into the ‘on’ position but don’t start the engine.
• Press the Gas Pedal: Press the accelerator pedal all the way.
• Hold for 10 Seconds: Step on the gas pedal for about 10 seconds.
• Wait for the Light to Reset: The oil change light will reset and turn off after a couple of seconds.

Follow the steps designated for your model, and your oil change light will be reset successfully.

5. Troubleshooting Common Issues

Resetting your Jeep Wrangler‘s oil change indicator may not work sometimes. If that happens, do not panic. The following are some tips for troubleshooting to fix common issues:

• Ensure the Ignition is in the Appropriate Position: Double check that the ignition is turned to the ‘on’ position and not the ‘off’ position, which could prevent the reset from happening.
• Re-try with the Gas Pedal Technique: For JK models, try stomping on the gas pedal exactly three times. In some cases, it will take a second attempt for the system to catch up.
• Check for Other System Defects: If the light remains after reset, it could be a sign of a concealed issue, like an faulty oil pressure sensor or electrical system defect in the vehicle.
• Consult the Owner’s Manual: Your car’s manual may provide step-by-step instructions or guidelines on troubleshooting in the event that the light does not reset after the standard procedure.

Through these troubleshooting steps, you can simply resolve most issues and reset the oil change light without difficulties.

6. When to Reset the Oil Change Light

It is advisable to reset the oil change light right after an oil change in order to keep the maintenance record of your car in a real state. That is why it should be done right after oil change:

• Keeps Maintenance Records Accurate: Resetting the oil change light keeps the Jeep system in sync with the actual service time, hence more convenient maintenance planning in the future.
• Prevents Misinterpretation: Resetting the light immediately averts misinterpretation when the next oil change is nearing, especially if the light continues to flash.
• Prevents Early Oil Change Reminders: If you fail to reset the light shortly after the oil change, you risk receiving an additional reminder to change the oil early, wasting time and money.

By resetting it right away, you’ll maintain a clear and precise maintenance schedule that aligns with your Jeep Wrangler’s needs.

FAQ’s

Q1: How do I reset oil change light on my 2015 Jeep Wrangler?

“To reset oil change light on a 2015 Jeep Wrangler, turn the ignition on but not start the engine. Step down the accelerator pedal three times, and the light will be reset.”

Q2: Why my oil change light won’t reset on my Jeep Wrangler?

“If the oil change light will not reset, make sure the ignition is set to ‘on’ and the engine turned off. If you have previously reset it, but the light is still on, you may be able to reset it again, or it could indicate there is a malfunction in your oil change interval sensor.”

Q3: How do I reset the oil change light on a 2020 Jeep Wrangler JL?

“For the 2020 Jeep Wrangler JL, put the ignition in the ‘on’ position, but don’t start the engine. Push the gas pedal down three times, wait for the light to flash, and your oil change reminder will be reset.”

Q4: Must I reset the oil change light every time that I get an oil change?

“Yes, it’s a good practice to reset the oil change light after every oil change to keep your maintenance records up to date and to not be reminded too soon that you need an oil change.”

Q5: Can the oil change light be reset without the use of an OBD scanner?

“Yes, the oil change light can be reset manually using the dashboard of your vehicle and you won’t require an OBD scanner for the majority of Jeep Wranglers.”

Q6: Is it necessary to reset the oil change light?

“While it’s not technically required to reset the light, it’s strongly recommended for maintaining accurate maintenance records and to avoid confusion about your vehicle’s oil change schedule.”

Conclusion

It’s simple and quick to reset your Jeep Wrangler’s oil change light that ensures your vehicle’s maintenance records are up-to-date. This easy process keeps your vehicle’s maintenance system current and operational. Don’t forget to reset the oil change light right after performing your oil change in order to prevent confusion and to monitor future service intervals.

Frequent oil changes and resets in a timely manner will maintain your Jeep in peak condition with smooth performance and prevent damage to your engine in the long run. By performing the steps outlined here, you are able to safely reset your Jeep Wrangler’s oil change light.